Custom epoxy resin dining room table with gold legs by Gizzwood

Epoxy Dining Table Cost: What Affects the Price

Epoxy resin dining tables vary a lot in price, and two tables that look similar can cost very different amounts. The difference usually comes down to a handful of things: how big the table is, which wood is used and how well it is dried, how much resin goes into it, the legs, and how much of the work is done by hand. This guide explains what drives the price so you can compare quotes fairly and decide where to spend.

What drives the price of an epoxy dining table

Size

Longer, wider and thicker tops use more wood and more resin, and they take more work to flatten, sand and finish. A large top is also harder to handle, join and cure than a small one, so price rises faster than length alone.

The wood

Species, slab quality and drying all matter. Large, well-matched slabs of a sought-after wood such as walnut cost more than smaller or plainer pieces. Properly dried wood is worth paying for: wood that is not dry enough can move after the resin has cured.

Hexagon epoxy resin dining table by Gizzwood

Resin amount and finish

A full river table uses much more resin than a table with a few filled cracks. Clear, tinted and colored resin all have different costs, and thick pours are done slowly, in stages, so they take more time.

Legs and base

Simple straight legs cost less than a sculptural wood base or custom-cast aluminum legs. The base is a design decision as much as a structural one, so it is worth choosing it early.

Custom design and hand work

A made-to-measure table involves choosing slabs, planning the shape and placing the resin by hand. No two tables are the same, and that individual work is part of the price.

Delivery

A large, heavy table has to be crated and shipped with care. Ask what delivery includes: doorstep delivery, or white glove service where the table is carried inside and set up.

Quick comparison

Factor Usually lower cost Usually higher cost
Size Compact top Long, wide, thick top
Wood Smaller, plainer slabs Large, matched, well-dried slabs
Resin Filled cracks and voids Full river, tinted or colored resin
Legs Simple straight legs Sculptural or cast aluminum base
Design Standard shape Custom shape and slab selection
Delivery Doorstep delivery White glove, in-home delivery

Why a handmade table costs more than a factory table

Factory tables are made in large batches from standard parts. An epoxy table is made one at a time: the wood is selected and prepared, the resin is poured and left to cure, and the surface is sanded and finished by hand. That is why a handmade epoxy table sits in a different price range from a mass-produced one.

Patch epoxy resin dining table by Gizzwood

How orders work at Gizzwood

  • Every table is custom. We build tables up to 5 meters (about 16 ft) long, and larger on request.
  • We ask for a 50% deposit to start your order. The remaining balance is due before your table ships.
  • Production and delivery take 4–8 weeks in total for tables with epoxy resin.
  • We share the final look of your table with you before it ships. If you do not like it, we keep it and build you a new one.
  • We ship by UPS and deliver to your doorstep. White glove service is not included in the price. Table legs are shipped separately from the tabletop.

What to ask before you order

  • How long was the wood dried?
  • Can I choose the size, resin color and legs?
  • What does delivery include, and is white glove service available?
  • Will I see the finished table before it ships?
  • What happens if the table arrives damaged? At Gizzwood, light damage is handled with a repair kit, and if it cannot be fixed with the kit we cover the cost of the repair.

Frequently asked questions

Why are epoxy dining tables more expensive than regular tables?

Each one is made individually from large slabs of dried wood, with a lot of resin and many hours of hand work, instead of being produced in batches.

Does a custom size cost more?

Usually yes, because a larger top needs more wood, more resin and more work. A smaller top can cost less.

How long will I wait?

At Gizzwood, production and delivery take 4–8 weeks in total for epoxy resin tables.

Do I pay everything up front?

No. We ask for a 50% deposit to start, and the rest is due before the table ships.

Can I choose the legs and resin color?

Yes. We customize everything: size, wood, resin color and legs.

Browse epoxy dining tables

For a full overview, read our epoxy dining table buyer's guide.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.