Epoxy Resin Table Care: How to Clean, Protect and Maintain It

An epoxy resin and wood table is a long-term piece of furniture, and it is easier to look after than most people expect. The resin surface is smooth and non-porous, and the wood is sealed under a protective finish. A few simple habits keep both looking good for years. This guide covers daily cleaning, heat, scratches, sunlight and what to avoid.

Everyday cleaning

For daily cleaning, use a soft, damp microfiber cloth and wipe in one direction, then dry with a second clean cloth. For sticky spots, a few drops of mild dish soap in warm water is enough. Rinse the cloth and wipe again so no residue is left behind.

Avoid abrasive pads, powders and scouring sponges. They leave fine scratches that dull a glossy surface over time.

Cleaners to avoid

• Ammonia based glass cleaners, which can cloud some finishes over time.
• Strong solvents such as acetone, nail polish remover and paint thinner.
• Bleach and harsh degreasers.
• Wax or silicone sprays meant for other furniture, unless the maker recommends them.

Heat: the one real risk

Cured epoxy tolerates normal room temperatures well, but it is not designed for direct contact with very hot cookware. Use trivets or heat pads under hot pans, pots, serving dishes and hot plates, and keep hot drinks on coasters. If your table has a specific heat rating from the maker, follow that figure.

Preventing scratches

Resin scratches more easily than hard glass but far less visibly than many people assume. A few habits help:

• Lift objects instead of dragging them across the table.
• Use felt pads under vases, lamps and decorative pieces.
• Use placemats for ceramic plates with rough bases.
• Put a protective pad under laptops and tablets.

Light surface marks can often be reduced by a professional polish. Ask the maker before trying anything yourself.

Sunlight and yellowing

Ultraviolet light is the main long-term enemy of epoxy. Strong, direct sun for many hours a day can slowly warm the tone of clear resin. If the table sits in front of a large window, consider UV-filtering window film or sheer curtains during the brightest hours. Moving the table a few feet from the glass also makes a noticeable difference.

Protecting the wood edges

Wood reacts to humidity. Keep the room between roughly 35 and 55 percent relative humidity if you can, and avoid placing the table directly over a heating vent or next to a radiator. Wipe spills quickly, especially along live edges and any exposed wood.

Moving and storing

Lift tables by their sturdy base or frame rather than by one end, and use two people for long pieces. If you move home, wrap the surface in a soft blanket instead of plastic, which can trap moisture.

Frequently asked questions

Can I put a hot plate on an epoxy table?

Use a trivet. Cured epoxy handles warmth, but direct contact with very hot cookware can mark it.

Does epoxy yellow?

Any clear resin can warm in tone after years of strong UV exposure. Keeping it out of long, direct sun slows this.

Can I use furniture polish?

Usually it is not needed. Ask the maker before using wax or polish, because some products leave a film.

How do I remove a scratch?

Very light marks may disappear with a soft cloth and a little mild soap solution. Deeper scratches are best handled by a professional.

Explore our epoxy furniture

See our epoxy resin dining tables, epoxy coffee tables and resin side and end tables.