How to Prepare a File for CNC Wood Carving (OBJ, STL and More)
Share
A good file is the fastest way from an idea to a finished CNC piece. When the model is the right size, in the right format and free of errors, it can move to quoting and machining without back-and-forth. This guide explains which formats to use, what to check before you send your file and what other details help us quote your project accurately.
Which file formats to use
For 3D carving, send a 3D model as an OBJ or STL file. These formats describe the surface of your model and are widely supported. We also accept other common 3D formats. If you are not sure which format you have, send what you have and we will tell you if we need anything else.
Checklist before you send your file
| Check | Why it matters |
|---|---|
| Real dimensions and units | The model should be built at its final size, in inches or millimeters, so nothing is scaled by mistake. |
| A closed, clean model | Holes or overlapping surfaces in the model can cause gaps or marks in the carving. |
| Enough detail, not too much | Detail smaller than the tool can cut will not appear; very heavy files slow things down. |
| Front, top and back | Tell us which side is the front and, for reliefs, that the back should be flat. |
| Depth for reliefs | State the maximum carving depth and the thickness of the panel. |
| Fits and joints | For furniture parts, add a drawing with the sizes of holes, joints and connecting parts. |
What to send with your file
- Material: any wood species, or aluminum, brass, lead, XPS foam or carbon fiber.
- Quantity: one piece or a batch.
- Finish: raw, sanded, oiled or lacquered.
- Reference images: photos or renders of how it should look.
- Your deadline: every project is custom, so tell us when you need it.
No 3D model yet?
That is fine. Send a sketch, photo or technical drawing with dimensions, the material and the quantity. We will look at it and tell you what we need to move forward.
Frequently asked questions
Is OBJ or STL better?
Both work well for 3D carving. Use the one your software exports most cleanly.
Should I send inches or millimeters?
Either is fine, as long as you tell us which one you used and the model is at its real size.
Can you work from a photo?
A photo is a good starting point. Send it with dimensions and we will tell you what else we need.
Send your file
See our custom CNC wood carving services, or email your file to officialgizzwood@gmail.com. For more on how pieces are made, read 5-axis vs 3-axis CNC for wood.
Related guides and collections